Your Store
Change Store
Use current location
-
from
stores found
from
stores found
Features
PLACEMAKERS
Pricing will be shown based on this store.
Opening Hours
This Protecto Wrap flashing tape is a secondary water ingress protection system for use in 100mm deep window and door openings in timber and steel framed buildings. This tape is made from modified SBS rubberized asphalt, features a polyethylene face and is self-adhesive. The paper backing cover on the inside and the white polyethylene sheeting on the outside forms a long-lasting bond.
- 150mm x 20m
- Requires no adhesives or fixings to hold in place
- Can be used on all accepted building wraps including bituminous paper
- Can be overlapped by 100mm to join to another roll
- Appraised for use by BRANZ
- Meets the requirements of the New Zealand Building Code (NZBC) Acceptable Solution E2/AS1, paragraph 9.1.5(b)
- No butterflies required, true one piece
Width | 22 CMT |
Height | 16.5 CMT |
Depth | 22 CMT |
Volume | 0.008 MTQ |
Warranty Duration | 15 ANN |