Your Store
Change Store
Use current location
-
from
stores found
from
stores found
Features
PLACEMAKERS
Pricing will be shown based on this store.
Opening Hours
The washer-head design is commonly used where a minimal head profile is necessary. The 12mm x 150mm is suitable for use in sill/bottom plate applications, and the washer head's low installed profile means modular wall and floor systems can be installed on top with no need for notching the wall framing to accommodate the anchor. The THD12150 Washer Head is an alternative fastening solution for proprietary fixed anchors for Bottom Plate applications. It meets* the requirements stated in NZS3604:2011 (7.5.12.3 /7.5.12.4)
- Each box comes with 2x T-50 bits and a socket
- The THD12150 Washer Head is an alternative fastening solution for proprietary fixed anchors for Bottom Plate applications. It meets* the requirements stated in NZS3604:2011 (7.5.12.3 /7.5.12.4)
- BRANZ Appraisal 983 (2023) for applications related to bottom plate fixings and holdown applications per NZS 3604 using Titen HD Washer Head
Width | 9 CMT |
Height | 10 CMT |
Depth | 24 CMT |
Volume | 0.0022 MTQ |